Last for a while

As promised, here's the last post for a while. The presentation went well. Everyone did a great job. It was bittersweet because I already miss that class. It was a good group. Here is the final table.

Last blog post for Furniture Design class

Blog post 12/8/2011

table top with half the tenons cut flush with the table top.



the wedged tenon through the mortise.

tenon with the

Things are winding down for semester.  This week, I attached the legs to the table top.  It was pretty cool.  The tenons went through the top. On the ends I had cut slits and drilled a hole at the end just above where the leg actually started.  This is to relieve the pressure when the wedge is inserted so the tenon doesn’t crack or split down into the leg. 

 

Noticed that it is Non-Toxic, Safe for the Environment, and Safe to Use.

I took my table home to sand it and apply the finish. That took longer than I thought it would.  After a while (day and half) I gave up because the top was so dry that once I got it super smooth, any change in the humidity and it would feather up/feel rough again.  On Saturday, I applied Danish Oil as the finish.  When I looked at it this morning, I noticed a spot of glue where the oil didn’t penetrate.  So I sanded that spot and re-applied some oil.  With Danish Oil, you supposed to put on a thin coat, wait 5 minutes and then wipe it completely dry so that no oil is left on a clean cloth. Then 8-10 hours later, you buff it until you get the level of shine that you want. 

So far, so good; except in Saturday when I was sanding, my husband and I considered different bowls to try to select the best one.  I had 2 from the kitchen that I had thought of from the very beginning, even before I thought I might make a concrete bowl. (I ran out of time for that option, but since I have the materials, I want to try to make it anyway with my son, over the holidays while he’s home from college.  He knows a lot about ceramics and loves working with concrete, so that should be fun). 

The bowl my husband and I agreed on was an anniversary present we had given ourselves a few years back. We bought it at a small shop in Stanton, Virginia where we spent the weekend to see a Shakespearean play at the Black Friar’s Theatre.  There was a slight problem.  Because the bowl is handmade it was not completely symmetrical.  So I tried to adjust the opening in the table top to accommodate the irregularities in the shape.  I ended up realizing that I was never going to get it exactly right and there would be gaps showing between the bowl and the table top.  Since I was starting to run out of time, I figured, I’d just go for it for the presentation on Monday and worry about fixing it later.  But after a good night’s sleep, I wasn’t happy with the gaps and decided to use a different bowl. 

My husband was really sweet and found a beautiful black Murano glass bowl from Italy online at Crate and Barrel.  He showed it to me and I liked it too, so he called ahead and drove to the store to pick it up.  While he was gone, I knew I had to fix the hole in the table top, so I found a pie tin that was just ever so slightly larger than the current hole.  I traced the pie tin onto the table top and started hand sanding.  I wrapped sandpaper around a thick dowel.  It took about a half hour just to get the oil off before I reached the wood.  Then for the next 2.5 hours I sanded, only stopping to check my line and change out the sandpaper.  My husband came home with the bowl and it is beautiful, which motivated even more to get the hole in the table to fit as best as I could get.  It’s still not perfect, but it is significantly better than it was. So the next step was to sand the whole top for consistency.  Again, it was a pain to remove the oil before I could reach the wood, but I was rewarded with a truly smooth surface.  Because the oil had penetrated most of the wood, the humidity was not such a big deal, and the surface remained finish.  Already, the oil is enhancing the wood’s beautiful grain.  So tomorrow from 5 – 8 pm, will be our final:  presentation/show.  I’m excited.  I know it will be fun.  I am sorry to see this class end.  There is still so much about woodworking that I want to learn and have the time to practice; maybe after graduation in a year.  

This was going to be my last blog entry for my Furniture Design class, but I realized that you might want to see the final result.  So after the show tomorrow, I do one last post of the show.






oops

I forgot to post yesterday.  Anyway, as I was finishing the mortises for the table top, a big chunk broke out.  I mean a really big chunk like 3 in x 2 in x 1.5 in.  At least it was on the bottom/side and not the top where it would be most visible.  But on the top there was another problem.  Some smaller pieces broke off and others were lifted and ugly.  I was heartbroken.  Thankfully, Professor Takagi said we could glue the chunk and the small pieces on the top side, and there would be some things we could to make these flaws not so obvious.

So the next step after fitting the tenons of the legs into the table top mortises was to cut lap joints in the stretchers and legs so they would fit together. I quadruple measured and walked through the plan several times and still managed to cut them wrong. It was getting late, but Professor T. said that maybe the table saw blade would not be changed for a couple days. I thought it best to take my chances with the blade adjustment rather than wreck something else. I felt like a walking hazard.  I was just overtired.  I went home, showered and slept for 13 hours.  It's amazing how much better a brain will function after a good night's sleep. Since I've been up late/early working on final projects for Commerical Design and Lighting Design, I definitely was a bit sleep-deprived.

On Thursday, Professor T. was holding extra shop hours, so I raced to get there and made the stupid mistake of driving through rush hour downtown D.C. to the shop rather than to the Mt. Vernon campus and taking the shuttle.  It took me 1.5 hours to get there. I made it just as everyone was getting ready to leave.  In about ten minutes I was able to reset the blade on the table saw by lining it up with some cuts that I had made on Wednesday. I still cut the second stretcher wrong, but I caught the mistake before I cut the whole thing and was able to recover.  I even managed to cut the center stretcher.
Professor T. was kind enough to also open the shop on Sunday for a few hours.  I was able to glue the stretches to the legs and still had time to use the band saw to cut out some shapes for my Lighting Design luminaire project. That was wonderful.

Tonight, Monday, I cut the wedges and glued the legs to the top and even glued the center stretcher.  Sign of relief.

Then home and worked on my Commerical Design (CD) presentation board.  Now my eyes are blurry and my head hurts, so I think it's time to say goodnight, and hope the dog doesn't bark before 7 AM.

sorry for the whining, if I can make it through the CD presentation on Thursday, life will be great. goodnight.

Monday feels like a million years ago

We didn't have class on Wednesday because of the Thanksgiving holiday.  What did we do on Monday?  Oh yeah, I learned how to make tenons on the table saw.  Wow, was that so much easier and straighter than doing them by hand. I'm glad for the experience of doing it the traditional way so that I can truly appreciate the mechanical system. 

I also chisled out another mortise and almost finished that last one on my table top, but didn't want to rush and mess it up.  

The rest of the week was cleaning house, cooking, Thanksgiving dinner, cleaning, UT football (beat A&M), HOMEWORK, HOMEWORK, HOMEWORK, HOMEWORK, and more HOMEWORK.  (commerial and lighting)  I was at the computer so long that my eyes were blurry and I had to stop because I couldn't see anymore, even with my new glasses.  sad.  Other than this blog, I am so grateful that I don't have homework for Furniture Design (although, it's the one class I would love to be working on).

hammer, hammer, hammer--ouch!

This past summer I had carpel tunnel surgery on both my hands. The surgery corrected the problem, but the total healing of the heals of the hand takes about a year. Well, Wednesday I chiseled out two mortises on the top of my table. The mortises came out fine, but my hand was really aching by the end of class. With the first mortise, I couldn't tell how far down I had gone and had chiseled out a good portion of the board below. With the second mortise I could better judge how I was doing and even finished by chiseling from the back (underside).

On Friday, I went with Professor Evans to Habitat for Humanity D.C. My luck it was sunny, but freezing. Since all the tasks involved heights, I volunteered to work on the roof because that crew would be in the sun and warm. The task for the roof was to put up sheathing. I didn't know it but, sheathing is thick plywood that is hammered to the joists and is the first surface of a roof. There were three staff members and five volunteers. Basically, the staff put down sheathing adhesive on the joists, and placed the sheathing. Then the volunteers hammered the sheathing to the joists at intervals of every six inches. It was tough because once I got the nail in with only an inch remaining, the nail would bend and have to be removed and a new nail hammered in its place. Because I didn't have to hit the second nail with as many strokes, it usually made it in without bending. I found if I could get the nail in with 12 strokes, all was great and satisfying. But if it took 14 or more strokes, I had to do it all over again. Uck! By lunch time, my hand was killing me. The lunch break only made it stiffen up and hurt worse. I believe I did at least my fair share of the work. I didn't take any breaks until after lunch, but I noticed our crew was all working harder and slower than before. I think we were all tired. Over all it was a fun and educational experience and I hope to join them when they go back in the spring.

Surprisingly, the next day, my hands didn't hurt at all! :-)

fun, fun, fun

I had so much fun in class tonight, that I just had to update this blog. The table saw was still in extreme demand, so I kept working on my table top.  My method was a bit unconventional, but it worked. The middle of my table top has a 9" hole that will hold a bowl. My goal tonight was to make that hole.

 I drilled lots of holes

 Cleaning out all those holes

Chiseled the pieces between the holes and yeah--a hole in the middle of the table top.  While this may seem to be a lot of unnecessary work, it gave me the experience of chiseling the wood.  I learned a lot about what to do and more importantly, what NOT to do. 

Sanding the inside.

The final result.  It still needs some hand sanding and on Wednesday I plan to cut (chisel) the mortises on the table top.  Wish me luck.

where does the time go?

Deja vu. I know I started this post a few minutes ago, and then poof! It was gone.

Ever get that nagging feeling that you've forgotten something, but are too tired to try to stay awake to figure out what it is? Well for me it was this blog. I usually update it on Sunday nights, but have been so consumed with my Commercial Design project that I completely forgot about this blog--that is until 4:30 AM when it woke me up.

Anyway, last week feels like ages ago. On Monday, I practiced more tenons and progressed to mortises. No sawing involved here. It was fun to get to use my chisels. Professor Takagi showed me another similar joint to the loose wedge that I was planning on, it is the fixed wedge. It will look great for the table top. (sorry no photos, I forgot that too). We ran out of time, but since it looks like it will take me a lot longer than I have to develop the skill to saw a straight line, Prof. Takagi said he'd show me how to make tenons on the table saw. (He put it much more diplomatically--like it would be good to learn multiple ways to make tenons and people practice for years to get handmade tenons just right). It did make me feel better. He even cut one crooked to show me that it wasn't just me, and that skilled craftsmen can still cut crooked sometimes.

Wednesday, I was running late and instead of parking my car at the garage and taking the shuttle, I thought it would be faster to drive straight to class at Foggybottom and pay to park there. Boy, was I mistaken. Traffic was horrible. Did I mention that class starts at 5:00 PM? What was I thinking? Driving about 5 miles in DC traffic shouldn't take an hour--right? Wrong! I managed to make it to class at 6:00 PM and felt lucky to be alive.

Since I was late, and it seemed everyone needed the table saw, it didn't look like I'd get to learn how to make tenons the new way that night. So I decided to work on my table top instead. That was quite satisfying. I knew that the two outsides (long grain) were true, but needed to be cut to the correct size. The end grain sides also needed to be cut to size as well. I measured everything 3 times and thought I might be able to drill the holes for my mortises, well maybe I might. Those will be super visible right there on top and a different color wood, any mistakes will really stand out. Professor Takagi fit me in to make my four cuts on the table saw to get my top to the correct size. I was proud and amazed that my measurements were correct and we didn't have to make any adjustments. By then it was getting late and I didn't want to press my luck with the drill press. So I cleaned up and left hopeful that things would be great next week.